Possible Solutions for Epson Error Code 0x10
Epson may have several error codes, and one of them is Epson error code 0x10. Despite its high-end technologies and the reliable reputation it has, the products aren’t resistant from issues – whether it is internal or hardware.
The issue can happen to any line, whether it is the WorkForce, the Expression, or the Stylus.
What May Cause the Issue?
As it was mentioned before, Epson error code 0x10 message is a pretty common code that may happen to most Epson devices; whether it is the printer or the scanner.
Epson has a good reputation on the global scale, but it doesn’t mean that their products are 100% faulty free.
Whereas most people speculate that the issue happens to new devices, it turns out that some of the old printers (and scanners) also experience the same issue.
Read more: Epson Printer Error 031008
The devices that are extremely busy or productive have bigger possibility to suffer from various error codes, and the 0x10 is one of them.
The error code typically shows that there is a faulty in the scanner section (of the printer) and the scanning mechanism is somewhat jammed.
It’s also possible that the scanner suffers from internal hardware problem. For old printer, normal usage’s tear and wear can be responsible for the issue. Power surges are also possible culprit.
Small Debris Removal
You’d be surprised to know that there are tons of small debris that may be stuck or existing on the scanner area, especially if the device is pretty busy and it is often used by more than one regular user.
The small debris can be paper clips, paper bits, dust and dirt, and so much more. If you want your printer (and also scanner) to perform well, you need to have a regular maintenance and care. Maintain a proper cleanliness, especially from dirt and dust.
Read more: Epson Error 0xf1
Open the cover, and check inside. Inspect carefully to see whether there is small debris existing. Even if you don’t find any, check the printer too.
In some cases, you may not be able to find the debris in the scanner, but you may find it in the printer. After the clean up, return everything to the original state.
Try doing the printing task. If it still doesn’t work, then you need to try other methods.
Reset the Printer
It’s not difficult at all to do this process:
- Remove the existing USB (power) cable from the device
- Just leave it be for several minutes. Afterwards restart the device
- Press the Power button and hold it for 60 seconds. While still holding the button, connect the device again to the USB cable.
- After it, still press the button for 50 seconds (60 seconds would be the max).
- Try to perform any printing job
For some users, this process can help them deal with the Epson error code 0x10. Not only it can deal with 0x10 issue, but it is typically working well with other types of errors.
Deal with the Printer’s Driver
Another possible solution is to tackle the printer’s driver. In many problems (and solutions), the driver is often outdated or damaged.
When the driver is not updated, it won’t have the capability to match the current system and technology. The only possible solution is to update the driver, and it is as easy as a pie.
The steps to do it are:
- Press Windows and then button S, so you can look for Device Manager
- After you are already in the Device Manager, look for the printer
- Right click (on the printer). You will see many different options (such as uninstall device, or disable device, or update driver). Go with Update Driver
- Once you click it, you just have to wait. It takes a while for the system to update everything. There would be instructions on the screen. You only have to follow them and you should be just fine.
Aside from these solutions provided here, there are still more methods that you can try. Some of them may involve repair tool, an auto updater, and such thing alike.
There are also limitless sources out there that you can consult for solutions. Try and check each one. In short, there is more than one solution that you can try to tackle the Epson error code 0x10 issue.