Home » Brother » Brother HL-L2340DW WiFi Setup & Driver Update

Brother HL-L2340DW WiFi Setup & Driver Update

Contents show

So you are looking for the easy guide of Brother HL-L2340 DW Wi-Fi setup, there you go on the right path.

Considering that Brother Industries is a well-known brand for the budget-friendly, definitive and monochrome laser printer either for home or for workplace, using it for the first time must need special guidance dealing with how to set it up.

In this article, you will find the easy guide to setup your Brother HL-L2340 DW to the Wi-Fi. Actually there are two ways available.

Those are the setup process using a USB cable and Wi-Fi connection. However, we would specifically share the Brother HL-L2340 DW Wi-Fi setup only. So have a quick read of the instructions given.

Get Your Pinter Ready

Get your Brother printer ready by plugging it into the electrical socket. Later, press the power button to turn it on.

Next, turn on your computer. Don’t forget to make sure that you have an active and strong internet connection.

The most important thing to do as well is to know your Wi-Fi username and password. You will generally find them at the back of your wireless router or modem.

The next step is to connect your Brother HL-L2340 DW to Wi-Fi.

Configure Your Brother Printer

The second instructions of Brother HL-L2340 DW Wi-Fi setup to follow is configuring your Brother printer. Start by placing your machine next to the network connection and select WLAN.

Press “OK” then. Later, select your WPS or AOSS and press the “Up” arrow key once your WLAN is enabled. This will lead to initiate your wireless setup wizard.

Continue the steps by pressing and holding the WPS or AOSS button on your wireless router for a while if the printer’s control panel displays “Press Key”. Note, the connected status will appear on the printer’s control panel.

Now click on “OK” and finally you are led to set up your Brother wireless printer.

The next thing to do is to install the drivers for your Brother printer. Though you might use USB connection, installing the driver is necessary for a network connection.

Finally you are done with the wireless printer configuration and Brother printer wireless setup.

Use Control Panels for Wireless Network Setup

To connect your Brother HL – L2340 DW to the Wi-Fi using control panels, follow the steps below and make sure you don’t miss any single step.

This is expected to allow you perform the succesfull wireless setup for your Brother printer.

1. Turn on your printer and it will go into a Deep Sleep mode. Go out of this mode with the available navigation keys “+” and “-“ so that you enter the Ready mode. later, select your network and press it.

2. Once you select the network, you will be provided with the WLAN option. Click on “OK” using the navigation keys to select your “Setup Wizard”.

Later, press OK. Now the Brother printer will find SSID or the Wi-Fi network around. Select the network using the navigation keys and press “OK”.

3. Enter the Wi-Fi password in the required fields. Click on the button continuously and it starts from numerals.

After that, the process will go through a series of lower case alphabets as well as the uppercase ones.

Click “OK” to select your letters or numbers. You can also use the Back Button to delete any numbers or letters whenever you want to.

4. Just after clicking “OK” in the step above, click on “+” option to apply the settings. Later, the screen will likely connect with your network.

Once it is connected, there will be a flash green light on the Wi-Fi button and display a connected message on the printer’s screen.

Later, make a print job to test whether or not you are successfully doing the setup. This print job is also aimed to know whether your Brother printer is working properly or not.

All in all, if you carefully follow all of the instructions of Brother HL-L2340 DW Wi-Fi setup we have just shared above, you will just find a right solution to your Brother printer wireless setup.

If there is any problem while you are following the guides, check your steps. Perhaps, you miss something in between.

Brother HL-L2340DW Driver Windows

Supported Platforms:

Windows 10 (32-bit/64-bit), Windows 8 (32-bit/64-bit), Windows 8.1 (32-bit/64-bit), Windows 7 (32-bit/64-bit), Windows XP (32-bit/64-bit), Windows Server, Windows Vista

Link Download
File Size : 43 MB

Brother HL-L2340DW Driver macOS

Supported Platforms:

macOS 10.3, macOS 10.4, macOS 10.5, macOS 10.6, macOS 10.7, macOS 10.8, macOS 10.9, macOS 10.10, macOS 10.11, macOS 10.12, macOS 10.13, macOS 10.14, macOS 10.15, macOS 11